For those who want to mount a BMW V8 M60 or M62 in a Volvo 240 with really nice engine mounts and a perfect fit.
There is room for the original brake servo.
When installing, remove the original engine mount/AC pump mount on the right side. Original engine mount on the left side is modified acc. simple attached description and is put back as oil connections go through this bracket and can also be a servo pump attachment depending on which engine you have.
On the M60B30 from the E34 the left front manifold grabs a bit on the mount and needs to be adjusted a bit or if using manifolds from any other M60 or M62 engine.
It is necessary to cut out a piece of the radiator beam to make room for the engine.
Depending on the choice of gearbox, it may be necessary to tap or cut out the gearbox tunnel.
Are you going to drive with one of BMW’s gearboxes?
Check gearbox beam – AS-002003-01
NEW! All our motor mounts can now be upgraded with polyurethane bushings in different hardnesses.
Now you can adapt your engine mounts to how you use the car.
Softer bushings for street and smaller/lighter engines and harder bushings for track/heavier engines.
